Compton's scattering
|
The type of scatter radiation that is produced when an incident photon interacts with an outer shell electron___
|
Gurney Mott Theory
|
When exposed to radiation, the silver halide crystal releases electrons and silver ions. The ions travel to the sensitivity speck and create a greater positive charge there
|
30%
|
Making a visible change in radiographic density requires that the minimum amount of change in mAs must be approximately __________
|
1
|
How many detectors are in an input screen of a fluoroscopic image intensifier?
|
1
|
What is the generating factor for a single phase generator?
|
1.35
|
The rectification number for computing heat units when operating a three phase six pulse x-ray machine is ______
|
1.41
|
What is the generating factor for a 3 phase 12 pulse generator?
|
1.45
|
What is the generating factor for a high frequency generator?
|
2
|
The tungsten atom has only ___ electrons in its K Shell
|
2
|
What is the grid conversion factor for a 5:1 grid?
|
2
|
What is the conversion factor for a 5:1 grid?
|
3
|
What is the conversion factor for a 6:1 grid?
|
4
|
What is the conversion factor for an 8:1 grid?
|
5
|
The bucky factor for a grid with a 12:1 ratio is ______
|
5
|
What is the grid conversion factor for a 12:1 ratio grid?
|
5
|
What is the conversion factor for a 12:1 grid?
|
9
|
If a technique using an 8:1 grid was 36 mAs, what would the mAs be for a non-grid technique?
|
69
|
If your beam is 100% Bremsstruhlung radiation, that means that your kVp setting is no greater than ______
|
70
|
In order to produce characteristic radiation your kVp setting must be at least _______
|
72
|
180 cm is the same as ____ inches
|
05-Jul
|
Most film cassettes should be replaced every how many years?
|
10 cm
|
Grids are employed when the body part thickness is greater than _________
|
10:1 or 12:1
|
What is the most common grid ratio used?
|
2.5 mm of aluminum or equivalent
|
What should the amount of total filtration be?
|